Braun Corporation FMVSS No. 403 Quick Reference Installation Sheet 32494
Lift Operating Instructions
A
C
E
DOWN
G
To Open Door(s):
Automatic Door Operator(s):
Press yellow OPEN switch until door(s) are fully open. Release switch.
Manual Door(s):
Manually open door(s) fully and secure.
To Unfold Platform (Out):
Press UNFOLD (orange OUT) switch (see Photo B) until platform stops (unfolds fully – reaches floor level). See Photos C and D. Release switch.
To Unload Passenger:
1.Read notes below! Load passen- ger onto platform facing outward and lock wheelchair brakes.
Note: Outer barrier must be UP and outer barrier latch must be fully engaged before loading pas- senger onto platform. Lower head to clear vehicle door jamb header.
2.Press red DOWN switch until the entire platform reaches ground level (stops) and outer barrier unfolds fully (see Photos H and I). Release switch.
Switch Arm Switch: Slide knob in to DOWN position. See Photo G.
B
D
F
H
I
K
M
UP
O
3.Unlock wheelchair brakes and unload passenger from platform.
Note: Outer barrier must be fully unfolded (ramp position) until the entire wheelchair has crossed the outer barrier. See Photos K and L.
To Load Passenger:
1.Load passenger onto platform fac- ing outward and lock wheelchair brakes.
Note: Outer barrier must be fully unfolded (ramp position) until the entire wheelchair has crossed the outer barrier. See Photos K and L.
2.Press red UP switch until platform stops (reaches floor level). Re- lease switch.
Switch Arm Switch: Slide knob out to UP position.
Note: Outer barrier must be UP and outer barrier latch must be fully engaged before raising platform. Platform will raise above ground level approximately two inches before latch engages fully.
J
L
N
approximately 2”
P