SPECIFICATIONS
Capacity | 440 lb. Single Cable, |
| 880 lb. Double Cable |
Line Speed | 33 Feet/Minute |
Cable Length | 38’ Single Lift, 19’ Double Lift |
Cable | 9/64” diameter steel strands |
Motor | |
Power Supply | 120 V~, 850 W |
| 7.1 A, Single Phase, 60 Hz |
Power Cord | |
Remote Switch | 5.5’ Cable Length |
Mounting Clamps | |
Duty Cycle* | 25% |
*This Hoist has a 25% duty cycle. This means that the hoist may only be run up to 2 minutes 30 seconds at a time and then it must be allowed to rest for at least 7 min- utes 30 seconds before further use.
CAUTION: To reduce the risk of electric shock or injury, use indoors only.
Included Accessories
1.Mounting clamps for attaching hoist to fixed overhead or rotating support.
2.Remote Switch with water sealed power switch, for safe operation.
3.38’ steel wire cable with sheaved pul- ley lift hook and weighted lift hook
4.Stabilizing weight on primary lift hook.
5.
SAVE THIS MANUAL
You will need this manual for the safety warnings and cautions, assembly instructions, operating procedures, mainte- nance procedures, trouble shooting, parts list, and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep both this manual and your invoice in a safe, dry place for future reference.
SAFETY WARNING &
CAUTIONS
WARNING: When using powered equip- ment, basic safety precautions should always be followed to reduce the risk of personal injury and hazards.
READ ALL INSTRUCTIONS BEFORE
USING THIS TOOL!
1. KEEP WORK AREA CLEAN. Clut- tered areas invite injuries.
2. OBSERVE WORK AREA CONDI- TIONS. Do not use tools in damp, wet, or poorly lit locations. Don’t expose to rain. Keep work area well lit. Do not use electrically powered equipment in the presence of flam- mable gases or liquids.
3. KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let them handle ma- chines, tools, or equipment.
4. STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
5. DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool’s ca- pacities.
6. USE THE RIGHT TOOL FOR THE JOB. There are certain applications for which this product was designed. Do not use a tool for a purpose for which it was not intended.
7. DRESS PROPERLY Do not wear loose clothing or jewelry, as they can
REV 05k; 08i; 08l; 09b
SKU 44006 | For technical questions, please call | Page 2 |