be caught in moving parts. Nonskid footwear is recommended. Wear re- strictive hair covering to contain long hair. Wear appropriate work clothing.
8.USE EYE, EAR AND BREATHING PROTECTION. Wear
9.DO NOT ABUSE THE POWER CORD. Protect the power cord from damage, either from impacts, pulling or corrosive materials. Do not yank machine’s cord to disconnect it from the receptacle.
10.DO NOT OVERREACH. Keep proper footing and balance at all times. Do not reach over or across running machines.
11.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for bet- ter and safer performance. Follow instructions for lubricating and chang- ing accessories. Inspect power cord periodically and, if damaged, have it repaired by an authorized technician. Inspect all moving parts and mount- ing bolts prior to use. Control handle and power switch must be kept clean, dry, and free from oil and grease at all times.
12.REMOVE ADJUSTING KEYS AND WRENCHES. Be sure that keys and adjusting wrenches are removed from the tool or machine work surface be- fore operation.
13.AVOID UNINTENTIONAL START- ING. Be sure that you are prepared to begin work before turning the start switch on.
14.STAY ALERT. Watch what you are doing. Do not operate this machine when you are tired.
15.DO NOT OPERATE THIS MACHINE WHILE UNDER THE INFLUENCE OF ALCOHOL, DRUGS, OR PRE- SCRIPTION MEDICINES.
16.CHECK FOR DAMAGED PARTS. Before using any tool, any part that appears damaged should be carefully checked to determine that it will oper- ate properly and perform its intended function. Check for alignment and binding of moving parts, any broken parts or mounting fixtures, and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or re- placed by a qualified technician.
17.REPLACEMENT PARTS AND AC- CESSORIES. When servicing, use only identical replacement parts, which are available from Harbor Freight Tools.
18.NOT TO BE USED FOR AIRCRAFT PURPOSES.
19.NEVER LIFT PEOPLE AND ANI- MALS OR HOIST LOADS OVER PEOPLE.
Special Warnings when using this
Electric Hoist
1.Using this powerful tool may cre- ate special hazards. Take particular care to safeguard yourself and those around you.
SKU 44006 | For technical questions, please call | Page 3 |