2.The Cable.
Be sure the cable is in good condi- tion, and is attached properly.
Do not use the Hoist if the cable is frayed, kinked, or wrapped improperly on the reel.
Do not replace the cable with a cable of lesser strength.
3.Power Supply.
Be sure the power cord and control handle are in good condition. Avoid use in wet conditions, or exposing the electrical components of this hoist to moisture.
Route the power cord so that it is out of the way of other tools and equip- ment. Take care to prevent damage to the power cord, or control handle cord. If the cord becomes damaged, repair or replace it before using the hoist.
4.Stand Back.
Stay out of the direct line that the cable is pulling. If it slips or breaks, it will “whiplash” along this line.
Never stand underneath a weight be- ing lifted.
Always wear ANSI approved eye protection when working around tools and equipment.
Do not hold the cable while using the hoist, as your hand can become caught.
Keep hands, clothing, hair and jew- elry clear of the hoist while in use. Use a spotter to assist you in assur- ing that it is safe to operate the hoist.
5.Power Limits.
Do not attempt to exceed the pulling limits of this hoist.
Assure that the mount to which the hoist is attached will hold the weight you will apply using this hoist.
6.WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.)
7.People with pacemakers should consult their physician(s) before use.
Electromagnetic fields in close prox- imity to heart pacemaker could cause pacemaker interference or pacemak- er failure.
8.The Warnings, Cautions, and Instruc- tions discussed in this instruction manual cannot cover all possible con- ditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
REV 04d; 06k; 09c
SKU 44006 | For technical questions, please call | Page 4 |