Golden Technologies GP204, GP215 owner manual Arm Rest Angle Adjustment, Footrest Angle Adjustment

Alante DX/LT Owner’s Manual Rev A_011811

VI. COMFORT SETTINGS - cont.

2.Adjust the arms to the desired width making sure not to exceed 28 inches total outside width at the armrests.

3.Tighten the arm width adjustment screw to secure the arm. See figure 18 on page 21.

4.Repeat steps 1-3 to adjust the opposite arm.

Arm Rest Angle Adjustment

1.Lift the armrest.

2.Loosen the stop nut with a 10mm wrench. See figures 19-21.

3.Use a 5mm Allen wrench to turn the armrest angle adjustment screw. Turn the screw outward to adjust the angle downward, turn it inward to adjust the angle upward to the desired angle.

Adjustment screws

10mm

stop nut

Figure 19 Figure 20 Figure 21

4.Tighten the stop nut with a 10mm wrench to lock the armrest angle adjustment screw.

5.Repeat steps 1-4 for the opposite arm.

Footrest Angle Adjustment

1. Lift the footrest plate to access the adjustment bolt. See figure 22.

Footrest Plate

Adjustment bolt

Figure 22

22