CRoSSBRACeS
Tighten Crossbraces
M13 wrench, M5 hex key
Check the crossbraces to ensure that the bolt and nut securing both crossbraces in the center of the wheelchair are secure (crossbraces should be loose enough to fold easily, yet snug enough to take up excess play). Use an M13 wrench and M5 hex key to tighten.
ATTeNdANT wHeeL LoCkS
Adjust wheel Locks
M10 wrench
1.Use an M10 wrench to loosen the adjustment bolt until the wheel lock slides on the frame.
2.Place the wheel lock in the locked position and slide it into contact with the tire.
lever adjustment bolt shoe
right wheel
adjust wheel lock
3.Place the wheel lock in the unlocked position and slide it 3/8" closer to the tire.
4.Use an M10 wrench to tighten the adjustment bolt and engage the wheel lock to check the fit. The wheel lock should indent the tire at least 3/8".
5.Repeat steps
WARNING: Ensure that wheel locks are adjusted so that they
lock in place appropriately before occupying or operating wheelchair.
22 |