Braun 6 manual Lift Operating Instructions

Page 31

A

C

Lift Operating Instructions

To Unload Passenger (continued):

2. Press red DOWN switch until the entire platform reaches ground level (see Photo B) and the outboard roll stop unfolds fully (ramp position). See Photo C. Release switch.

3. Unlock wheelchair brakes and unload passenger from platform.

Note: Roll stop must be fully unfolded (ramp position) until the entire wheelchair (or standee) has crossed the roll stop. See Photos E and F on page 30 also.

B

D

Page 29

Image 31

Contents Series Congratulations Contents Introduction Lift TerminologyLift Components Hand-Held Switch Control BoxRegarding Lift-Titelatches are provided on pages 15 Fold switch is pressed Automatic IllustrationFixed Inboard Safety Symbols Safety FIRST! Know That Lift Operation SafetyLift Operation Safety Precautions Lift Operation Safety Within the lift occupant area and clear of moving parts Lift Operation Safety Pre-Lift Operation Notes and Details Down Lift Control SwitchesLift Features Disengaged Lift-Tite Latch Engagement Pin Roller Pre-Lift Operation Notes and Details Fully Folded Fully Unfolded Vertical Stop non-IB Fully-Folded Disengaged Roll Stop Pre-Lift Operation Notes and Details Lift Passengers Pre-Lift Operation Notes and Details Pre-Lift Operation Notes and Details Wheelchair-Equipped Occupant Seat Belts Operation Procedure ReviewPreventive Maintenance Lift Operating Instructions To Unload Passenger Lift Operating Instructions To Load Passenger Close Doors Manual Operating Instructions Follow all Lift Operation Safety PrecautionsTo Lower Platform Down To Unfold Roll Stop To Unfold Platform OutTo Raise Platform To Fold Roll StopTo Fold Platform Decals Decals and AntiskidBefore posting decals Available Antiskid AntiskidMaintenance and Lubrication Independent Bridge Plate non-IB Pivot Points Places Cylinder Code Warranty and Registration InstructionsWarranty and Registration Instructions Providing Access to the World ADA