Pre-Lift Operation Notes and Details
Lift Features (continued)
(bridging) position when it reaches vehicle floor level. The roll stop must overlap the lift base plate a minimum 1/2".
When the FOLD switch is pressed and the platform folds from floor level to the stow
(vertical) position, the roll stop/ bridge plate automatically travels inboard to the stowed position.
Read warning posted on opposite page. Discontinue lift operation immediately if the roll stop does not operate properly.
Fixed Inboard Roll Stop: A stationary inboard roll stop is built into
Independent Hinged Bridge Plate:
Fully Folded | Fully Unfolded |
(vertical) | (horizontal) |
Inboard | Inboard Roll Stop |
Roll Stop | (bridging position) |
Automatic Inboard Roll Stop and Bridge Plate “IB”
The inboard roll stop “IB” must overlap the base plate a minimum 1/2".
Page 18