Braun L200UARS manual Maintenance and Lubrication

Page 46

Maintenance and Lubrication

Maintenance is necessary to ensure safe and troublefree lift operation. General preventive maintenance consisting of inspections of your lift system and cleaning the lift should be a part of your routine.

L200UARS Series lifts are designed with many self-lubricat- ing components. Lubricate the pivot points specified on opposite page approximately every four weeks (or 100 cycles) with a light penetrating type oil (30 weight or equivalent). Severe conditions (weather, environment, heavy usage, etc.) may require more frequent lubrication.

Preventive maintenance visual inspections and lubrication procedures do not take the place

of the procedures specified in the Maintenance and Lubrication Schedule provided in the appli- cable lift installation and service manual. The procedures outlined in the Maintenance and Lubrica- tion Schedule must be per- formed at the recommended scheduled intervals by an authorized Braun Corporation service representative who has attended and been certified by The Braun Corporation Sales and Service School.

If the scheduled maintenance and lubrication procedures are not being performed, or if there is any sign of lift damage, wear, abnor- mal condition or improper opera- tion, discontinue lift use imme- diately. Contact your sales representative or call The Braun

Corporation at 1-800-THE LIFT. One of our national product support representatives will direct you to an authorized service repairman who will inspect your lift.

WARNING

Maintenance and lubrication proce- dures must be per- formed by authorized service personnel as specified in the applicable installa- tion/service manual. Failure to do so may result in serious bodily injury and/or property damage.

Page 44

Image 46
Contents 5!23 5LTRA 3ERIES  Congratulations Contents Lift Terminology Illustration ARSLift Terminology IntroductionLift Components Lift Terminology Lift Terminology Ward from the vertical position to the ramp position Lift Operation Safety Safety Symbols Safety FIRST! Know ThatLift Operation Safety Precautions Lift Operation Safety Lift Operation Safety Lift Operation Safety Pre-Lift Operation Notes and Details Lift Control Switches Lift Features Striker Back Operation is not required for this roll stop Fully Unfolded Roll Stop Ramp position Pre-Lift Operation Notes and Details Pre-Lift Operation Notes and Details Pre-Lift Operation Notes and Details Floor Loading or unloading passengers in or out of the vehicle Operation Procedure Review Wheelchair-Equipped Occupant Seat BeltsPreventive Maintenance Lift Operating Instructions Open Doors and Secure To Unfold Platform Out To UnloadTo UnloadPassengerPassenger To Load Passenger Close Doors Manual Backup Pump Manual Operating InstructionsManual Unfold and Fold Instructions To Unfold Platform Out Assistant support the platform To Unfold OutBefore pulling the actuator quick Release pin To Fold Platform Manual Unfold and Fold Instructions Ally. Secure platform so that To do so may cause propertyManual Up/Down Backup Pump Instructions To Lower Platform Down To Unfold Roll Stop To Fold Roll Stop To Raise PlatformDecals and Antiskid Decals25652 24668 17866 Antiskid AntiskidMaintenance and Lubrication Lubrication Diagram PlacesWarranty and Registration Instructions Braun CorporationWarranty and Registration Instructions Providing Access to the World 5!23 5LTRAT3ERIES