Pre-Lift Operation Notes and Details
Lift Features
Become familiar with all lift fea- tures and the proper operation of the lift components before at- tempting lift operation. Refer to the Lift Terminology Illustration on page 2 for identification of specific lift components if not clearly depicted in this section. Contact The Braun Corporation at
Unfold and Fold: Series 05 lift models are equipped with electric fold actuators that feature a
that the platform has reached the fully unfolded position or the fully folded position.
When pressing the orange UNFOLD (Out) switch to unfold the platform from the stowed position, the lift operator must continue to press the switch until the actuator ratchets (makes audible clicking). The clicking sound indicates the powered whale is fully unfolded (deployed). If the actuator does not ratchet, the whale has not reached the fully unfolded position and the lift may be damaged when lowering or raising the platform.
Note: The platform must be in
CAUTION
Press UNFOLD switch until actuator makes audible clicking sound (ratchets). Failure to do so may result in lift damage.
the fully raised position before the platform can be folded or unfolded. If the platform does not unfold when the UNFOLD switch is pressed or the platform does not fold when the FOLD switch is pressed, press the UP switch momentarily and try again.
Page 15