Fluke 7350 specifications Symbols Used in this Manual, Features

General Information 1

Symbols Used in this Manual

Symbols Used in this Manual

In this manual, a Warning identifies conditions and actions that pose a hazard to the user. A Caution identifies conditions and actions that may damage High Pressure Gas Controller/Calibrator.

Symbols used on the High Pressure Gas Controller/Calibrator and in this manual are explained in Table 1-1.

	Table 1-1. Symbols
Symbol	Description
B	AC (Alternating Current)
J	Earth Ground
W	Important Information: refer to manual
X	Shock Hazard
~	Do not dispose of this product as unsorted
	municipal waste. Go to Fluke’s website for
	recycling information.
P	This equipment meets the requirements of all
	relevant European safety directives. The
	equipment carries the CE mark

Features

The following features are available on all RUSKA 7350s.

Mercury-Free

All components in the RUSKA 7350 are mercury-free.

NIST Traceability

All RUSKA 7350s are calibrated per ANSI/NCSL Z-540-1-1994 using RUSKA deadweight gauges that are directly traceable to the National Institute of Standards and Technology (NIST). All instruments are provided with a NVLAP accredited calibration certificate.

Power Supply

The RUSKA 7350s are either 100 – 120VAC, 1PH, 50/60 HZ or 220 – 240VAC, 1PH, 50/60 HZ.

Measure While Control

The RUSKA 7350 simultaneously digitally displays the commanded pressure, the actual pressure, and the difference between the two. A bar graph indicates how close the actual pressure is to the commanded pressure, as well as how close the commanded pressure is to the RUSKA 7350’s full scale pressure.

Friendly Display

The RUSKA 7350’s color active matrix TFT display combines a bright, low-glare readout with a wide viewing angle. During normal operation, the measured pressure is easily visible from a distance of 10 feet (3 meters).

Adjustable Pressure Display

The pressure display may be adjusted to show one decimal greater than or less than the default resolution.

1-3