Fluke 7350 specifications Mode?

		Remote Operation	5
		Device Messages
:MODE?		calibration edit enabled?
:MODE ON¦OFF¦1¦0		enable calibration edit
DISP		(Cal. button required)
:ENABle ON¦OFF¦1¦0		turns front panel display on/off
:TEXT <string>		displays message on front panel
:BGRaph <number>		sets bar graph maximum
OUTPut
:STATe ON¦OFF¦1¦0		off=MEASure, on=CONTrol
:STATe?		returns 0=Measure or 1=Control
:MODE MEASure¦CONTrol¦VENT		sets mode
:MODE?		returns mode string
PROGram
:CATalog?		returns list of defined programs
[SELected]
:DEFine <program block>		Define program
		press1, toler1, dwell1, max1, press2,
		toler2, ..
:DEFine?		read program definition
:DELete
[:SELected]		deletes current program
:ALL		deletes all programs
:NAME <program name>		select current program
:STATe RUNPAUSeSTOPCONTinue		set program state
:STATe?	`	read program state
:CONFigure
:RECall		restore saved configuration
:SAVE		save current configuration
SENSE
[:PRESSure]
[:RESolution] <number>		set pressure display resolution
:AUTO <boolean>ONCE		return to default resolution
:MODE?		returns ABSOLUTE or TARE
:RANGE
[:UPPer]		returns RUSKA 7350 full scale value in
units
:LOWer		returns 0
:REFerence
[:HEIGht] <number>		set head height
:SGRavity <numbers>		set specific gravity
[SOURCE]
[:PRESsure]
[:LEVel]
[:IMMediate]
[:AMPLitude] <number>		sets pressure setpoint
[:AMPLitude]?		read pressure setpoint
:MODE FIXedLIST		set source parameter set
:TOLerance <number>		specifies output tolerance
:SLEW <number>		set slew rate
:CONTrol <number>		set control band

5-5