Fluke 7350 Menu Setup Remote, Gpib Address, Protocol, Serial Interface Set-Up, Menu Setup System

Local Operation 4

Menu

Menu Setup — Remote

The Menu Setup Remote screen is where the remote communication interface is set-up.

gld16.bmp

Figure 4-14. Menu Setup Remote - Menu

GPIB Address

Sets the IEEE-488 interface address.

Protocol

The Protocol defines which protocol should be used by the remote interface. The options are Standard Communication for Programmable Instruments (SCPI) which is the standard interface, 6000 to emulate the Series 6000 pressure controller, and 510 to emulate the Model 510 pressure controller. When using the SCPI interface, the RUSKA 7350 will emulate the 7010 and 7215 series controllers.

Serial Interface Set-Up

The operator can set-up the Baud Rate, Data Bits, Parity, and Stop Bits for the Serial Interface.

Menu Setup — System

The System Menu identifies the Software release version that is being operated in the Calibrator. It also stores and allows the operator to edit the Date and Time.

gld17.bmp

Figure 4-15. Menu Setup System - Menu

4-15