Fluke 7350 specifications List, Example Scpi Commands

RUSKA 7350

Users Manual

:LIST
:PRESsure <number> [,<number>]	set list of pressure values
:POINts?	returns number of points defined
:DWELl <number> [,<number>]	specifies dwell times
:POINts?	returns number of dwell times
:TOLerance <number> [,<number>]	specifies tolerances
:POINts?	returns number of tolerances
:DIRection UPDOWN	direction to go through list
:COUNt <number>	number of times to go through list
STATus
:OPERation
[:EVENT]?	read/clear operation event register
:CONDition?	read operation condition register
:ENABle <number>	set operation enable mask
:QUEStionable
[:EVENT]?	read/clear questionable event register
:CONDition?	read questionable condition register
:ENABle <number>	set questionable enable mask
:PRESet	reset condition flags
SYSTem
:DATE <year>,<month>,<day>	set system date
:ERRor?	returns <error#,”descr;info”>
	or 0,”No Error”
:KLOCk ONOFF10	lock keyboard
:TIME <hour>,<minute>,<second>	set system time
:VERSion?	returns 1991.0
:LANGuage “6000””SCPI”	set interface protocol to 6000 or SCPI
:PRESet	reset system
TEST
:ELECtronic?	perform electronic self-test
UNIT
:DEFine<n> <name>,<number>	define a unit
:LENGth MMIN	set length units for head height
[:PRESsure] <unit name>	set pressure units

Example SCPI Commands

To request the current pressure reading, all of the following commands are equivalent:

:MEASURE:PRESSURE?

:measure:pressure?

:MeAsUrE:pReSsUrE?

:meas:pres?

:measure?

:meas?

MEAS?

To set the control pressure setpoint to 50, all of the following commands are equivalent:

SOURCE:PRESSURE:LEVEL:IMMEDIATE:AMPLITUDE 50 SOUR:PRES:LEV:IMM:AMPL 50.0

PRESSURE +50 PRES 50

5-6