Fluke 7350 specifications Remote Operation, Capabilities, IEEE-488

Chapter 5

Remote Operation

Remote Operation

The RUSKA 7350 can be operated remotely by a computer. Three interfaces are supported; IEEE-488, RS-232, and RS-485. All three interfaces support Standard Commands for Programmable Instruments (SCPI).

The IEEE-488 interface additionally supports emulation of a Single Channel Interface Panel (Models 6005-701 and 6005-761). The IEEE-488 interface conforms to the following standards.

ANSI/IEEE Std 488.1-1987	IEEE Standard Digital Interface for Programmable
	Instrumentation
ANSI/IEEE Std 488.2-1987	IEEE Standard Codes, Formats, Protocols, and Common
	Commands
SCPI 1991.0	Standard Commands for Programmable Instruments

Capabilities

IEEE-488

The following identification codes define the interface capabilities of the RUSKA 7350. Their meaning is described in the IEEE-488 standard.

SH1	Source Handshake, Complete Capability
AH1	Acceptor Handshake, Complete Capability
T5	Talker
L3	Listener
SR1	Service Request, Complete Capability
RL1	Remote-Local, Complete Capability
PP0	Parallel Poll, No Capability
DC1	Device Clear, Complete Capability
DT0	Device Trigger, No Capability
C0	Controller, No Capability

The optional IEEE-488 interface is installed next to the processor board. The interface is identified by the IEEE-488 standard connector on the back panel of the unit.

5-1