Light
Condenser
Arm
Reflection Microscopy
Light is reflected off the sample. (For opaque samples)
Step 1. Setting the sample.
Follow the steps
Step 2. Setting up the light source.
Adjust the condenser arm so that the condenser focuses on flashlight beam on top of the sample (see yellow arrow).
Step 3. Focusing the microscope.
Look through the eyepiece and focus image by slowly raising the stage using the focusing knob.
Setting up the Electronic Eyepiece
USB Eyepiece
(For viewing on computer)
Installing Electronic Eyepiece
Step 1. Remove the regular eyepiece from the monocular. Insert the USB Eyepiece into the monocular tube.
Step 2. Connect the electronic eyepiece to the computer via USB cord.
Step 3. Install driver and software (see instructions on next page).
Monocular