4
ENGLISH
INSTALLING/ REMOVING THE BELT HOOK
1Align the belt hook tabs with the guides on the rear of the
transceiver.
2Slide the belt hook down the guides until it locks in place.
3To remove the belt hook, pull back on the lever on the top
of the belt hook and slide the belt hook out of the guides.
INSTALLING/ REMOVING THE STEREO HEADPHONES
Note: Always switch OFF the transceiver power when installing or
removing the headphones.
1Open the SP tab on the
top of the transceiver.
2Insert the headphone
plug into the SP jack.
3When you remove the
head-phones from the
transceiver, be sure to
cover the SP jack with
the attached tab in
order to keep dust and
dirt away from the contacts.
UBZ-GR14 E 1-20 01.4.12, 9:35 AM4