ENGLISH

DISPLAY ILLUMINATION

1To turn the display backlight ON, press the L key momentarily.

The display backlight turns ON for 10 seconds.

Each time you press any key other than the PTT switch while the display backlight is ON, the 10 second timer will reset, allowing the display to remain illuminated for an additional 10 seconds after releasing the key.

2To turn the display backlight OFF, press the L key momentarily while the display backlight is ON.

BATTERY POWER SAVER

This transceiver has been designed to give you the most out of your battery power. While using the transceiver in FRS Mode, the battery saver will automatically switch ON after 10 seconds have elapsed with no operations or received calls. Operating the transceiver or receiving a call will switch this feature OFF until 10 seconds of non-operation occurs again.

LOW BATTERY WARNING

When battery power becomes low, the “BATT” icon will flash. Replace the batteries at this time.

When replacing batteries, replace all batteries at the same time; do not mix old and new batteries together. Additionally, use batteries of only the same type; do not mix different types of batteries together.

14

UBZ-GR14 E 1-20

14

01.4.12, 9:35 AM

Page 17
Image 17
Kenwood UBZ-GR14 instruction manual Display Illumination, Battery Power Saver, LOW Battery Warning