Kenwood UBZ-GR14 instruction manual INSTALLING/ Removing Optional Accessories

INSTALLING/ REMOVING OPTIONAL ACCESSORIES

Note: Always switch OFF the transceiver power when installing or removing the optional accessories.

The following accessories can be used with this transceiver:

•SMC-34 Speaker-Microphone

•HMC-3 Headset

•EMC-3 Clip Microphone with Earphone

To install these accessories:

1Open the MIC-SPtabs on the top of the transceiver.

2Insert the accessory’s plugs into the MIC-SPjacks.

3When you remove the accessory from the transceiver, be sure to cover the MIC-SPjacks with the attached tabs in order to keep dust and dirt away from the contacts.

Note:

◆Refer to the accessory instruction manuals for detailed instruction on each of the accessories.

◆The 3 programmable function keys on the SMC-34 cannot be used with this transceiver. To use the speaker-microphone, press the PTT switch to transmit and release it to receive. You can also adjust the volume level using the SMC-34 Volume control.

ENGLISH

5

UBZ-GR14 E 1-20 5 01.4.12, 9:35 AM