Kenwood UBZ-GR14 instruction manual Preparation, INSTALLING/ Removing the Batteries

PREPARATION

INSTALLING/ REMOVING THE BATTERIES

This transceiver requires 4 AAA batteries. Use high quality alkaline batteries to enjoy longer periods of battery life.

1If the belt hook is installed, first remove it from the transceiver (refer to “INSTALLING/ REMOVING THE BELT HOOK” on page 4).

2Pull back on the battery cover latch, then remove the battery cover.

3Insert or remove 4 AAA batteries.

•When inserting batteries, be sure to match the battery polarities with those marked in the battery compartment.

4Replace the battery cover, making sure the battery cover latch locks in place.

ENGLISH

3

UBZ-GR14 E 1-20 3 01.4.12, 9:35 AM