Your New Wide TV
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. The remote control can also operate your Set Top Box, VCR, cable box, and DVD player.
Installing Batteries in the Remote Control
With normal use, the batteries in the remote control should last about a year. If you notice a performance degradation while using the remote, the batteries may need to be replaced. Make sure you replace both batteries and do not mix old and new batteries in the remote control. If you won’t be using the remote control for a long time, remove the batteries and store them in a cool dry place.
1. POWER
Turns the TV on and off.
2. S.MODE
Adjust the TV sound by selecting one of the preset factory settings (or select your personal, customized sound settings.)
3. P.MODE
Adjust the TV picture by selecting one of the preset factory settings (or select your personal, customized picture settings.)
4. +100
Press to select cable channels over 100 on TV.
5. VOL
Press to increase or decrease the volume.
6. MUTE
Press to mute the TV sound.
7. FAV.CH (Favorite Channel)
Press to switch between your favorite channels.
8. MENU
Displays the main
9. STILL
Press to stop the action during a particular scene. Press again to resume normal video.
10. P.SIZE
Press to change the screen size.
11. MODE
Selects a target device to be controlled by the Samsung remote control (i.e., TV, VCR, Cable, or DVD).
12.
Tunes to the previous channel.
13. TV/VIDEO
Press to display all of the available video sources (i.e., TV, STB, VCR, DVD, DTV, PC).
14.CH 
and CH
(Channel Up/Down)
Press CH 
or CH 
to change channels.
15. INFO
Press to display information on the TV screen.
16. EXIT
Press to exit the menu.
17.UP, Down, Left, Right (▲, ▼, œ, √)/ENTER
Press to select highlight up, down, left, or right. While using the
18.MTS(Multichannel Television Stereo)
Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
19. 
SURROUND
Press to hear the Dolby surround effect.
20. ADD/DEL
Press to add or erase channels in the TV’s memory.
Use the ADD/DEL button to memorize/erase the fine tuning after fine tuning channels.
21. SLEEP
Press to select a preset time interval for automatic shutoff.
22. PIP
Activates picture in picture.
23. SET
Used during set up of this remote control, so that it will work compatibly with other devices (VCR, STB, cable box, DVD, etc.)
24. DNIe
Activates DNIe (Digital Natural Image engine).
25. PIP controls
SWAP; Exchanges the video signal that is currently displayed on the main screen with the signal in the PIP window.
SIZE; Press to make the PIP window larger or smaller.
CH(PIP); Displays the available channels in sequence. (These buttons change channels in the PIP window only.)
26. VCR controls
Controls VCR tape functions: Rewind, Play, Fast Forward, Stop, Pause.
27. RESET
If your remote control is not functioning properly, take out the batteries and press the reset button for about 2~3 seconds.
Slide the back cover all the way out
1 to open the battery compartment of the remote control.
Install two AAA size batteries.
2 Make sure to match the “+” and
3 Slide the cover back into place.
|
|
|
| 16 | 17 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
