ENGLISH
GETTING STARTED
1SWITCHING THE POWER ON/ OFF
To switch the transceiver power ON (or OFF), press and hold the 
switch for 3 seconds.
•A tone sounds to confirm that the power has been switched ON (or OFF).
2SELECTING AN OPERATING MODE
1Press and hold the MODE key to cycle through FRS, FM, and FRS/FM Models.
•Each time you press and hold the MODE key for 0.5 seconds, the operating mode cycles to the next mode.
•FRS, FM, or both icons appear, indicating the selected operating mode.
2 Depending on the operating mode you have selected, refer to the appropriate section:
• FRS Mode – page 7. FRS Mode allows you to send and receive transmissions.
• FM Mode – page 10. FM Mode allows you to listen to FM radio broadcasts.
• FRS/FM Mode – page 11. FRS/FM Mode allows you to monitor only a single channel for sending and receiving transmissions, while also listening to FM radio broadcasts.
3 ADJUSTING THE VOLUME
Press the ▲ or ▼ key to increase or decrease the volume level.
• Press and hold the ▲ or ▼ key to continuously increase or decrease the volume until you release the key, or until the volume is at its maximum or minimum level.
• The volume level (1 ~ 8) appears for approximately
5 seconds before returning to the channel number/ station.
6
6 | 01.4.12, 9:35 AM |
