FRS MODE
1SELECTING A CHANNEL
1Press the MODE key momentarily.
•The FRS and CH icons blink.
2Press the ▲ or ▼ key to increase or decrease the channel number.
•Press and hold the ▲ or ▼ key to continuously increase or decrease the channel number until you release the key.
ENGLISH
3 Once you have selected your desired channel number (1 ~ 14), press the PTT switch to complete the selection and return to normal operation.
2 LISTENING FOR A CALL
1 If a calling party first presses their M key to alert you that they are going to speak, you will hear a 2 second ringing tone.
2 You will hear audio from the speaker. Readjust the volume if necessary.
• The reception indicator appears while you are receiving.
3 When the party has finished speaking, you can respond to the call (refer to “3 MAKING A CALL” on page 8).
This transceiver has a feature that allows you to ignore unwanted calls. To ignore unwanted calls, you can set up a code on your selected channel. However, you must ensure that each member of your group is using the same code, otherwise you will be unable to communicate with each other. If you set the code on your selected channel to “OF” (off), you will hear calls from everyone within range who is using the same channel you have selected.
7
7 | 01.4.12, 9:35 AM |
