Panasonic DP-MB350 manual Selecting the operation mode Scan/Copy/Fax, Setting the original

2. Preparation

2.4Selecting the operation mode (Scan/Copy/Fax)

You can select the desired mode by pressing one of the following buttons.

–{Scan}: Select this mode when using the unit as a scanner (page 31).

–{Copy}: Select this mode when using the unit as a copier (page 36).

–{Fax}: Select this mode when using the unit as a fax machine (page 42).

Note:

LThe default operation mode is the copy mode.

LYou can change the default operation mode (feature #463 on page 60) and the timer before returning to the default operation mode (feature #464 on page 60).

2.5 Setting the original

2.5.1 Using the scanner glass

1

2

1Open the document cover (1).

2Place the document FACE DOWN on the scanner glass (2), aligning the top left of the document with the corner where the m mark is positioned.

3Close the document cover.

Note:

LConfirm that there are no documents in the automatic document feeder.

LPlace the original onto the scanner glass gently. To

avoid malfunction, do not press down too firmly.

LIf the original is a thick book, do not close the

document cover.

LConfirm that any ink, paste or correction fluid has dried completely.

LEffective scanning area is shown by the shaded area:

Effective scanning area

4 mm		348 mm
(5/32")	(13 11/16")

4 mm (5/32")

208mm

(8 3/16")

4 mm (5/32")

4mm

(5/32")

For assistance, please contact an authorized Panasonic dealer. 19