Panasonic DP-MB350 Sending a fax manually, To redial the last number Redial

6. Fax

6.1 Sending a fax manually

6.1.1 Using the scanner glass

By using the scanner glass, you can send a page from booklets or small size paper that cannot be sent with the automatic document feeder.

{Fax} {Redial} {Start}

{Set}{V}{^}{<}{>}

1If the {Fax} light is OFF, turn it ON by pressing

{Fax}.

2Set the original (page 19).

3If necessary, change the resolution and contrast according to the type of document.

L To select the resolution, see page 42. L To select the contrast, see page 42.

4Dial the fax number.

LTo send a single page, go to step 7.

LTo send multiple pages, go to the next step.

5Press {V} or {^} repeatedly to select “Quick Scan”, then press {<} or {>} repeatedly to select “On”. i{Start}

L Wait until “Scan: Press <Set>.” “Send: Press <Start>.” is displayed.

L Press {<} or {>} repeatedly to change the resolution during scanning, and then press {Set}. The setting will be applied starting with the next page.

6Place the next page on the scanner glass. i{Set} L To send more pages, repeat this step.

7{Start}

Note:

LTo stop sending, see page 78.

LYou can change the default operation mode (feature #463 on page 60) and the timer before returning to

the default operation mode (feature #464 on page 60).

To select the resolution

1.Press {V} or {^} repeatedly to select “Resolution”.

2.Press {<} or {>} repeatedly to select the desired resolution. i{Set}

–“Standard”: For normal-sized characters.

–“Fine”: For small-sized characters.

–“Super Fine”: For very small-sized characters.

–“Photo”: For photographs, shaded drawings, etc.

LUsing the “Fine”, “Super Fine” and “Photo” settings will increase transmission time.

To select the contrast

Adjust this setting depending on the darkness or lightness of the document. 5 levels (low to high) are available.

1.Press {V} or {^} repeatedly to select “Contrast”.

2.Press {<} or {>}. i{Set}

Note:

LYou can save the previous contrast setting (feature #462 on page 60).

To redial the last number {Redial}

LIf the line is busy, the unit will automatically redial the number 1 time.

Note:

LTo stop sending, see page 78.

Reserving the fax transmission (Dual Access)

You can reserve a fax transmission even when the unit is just receiving a fax or sending a fax from memory.

–Up to 3 reservations when sending

–Up to 4 reservations when receiving

1.Set the original during fax reception or fax memory transmission.

2.Enter the fax number using the dial keypad or navigator directory.

3.When using the scanner glass, press {Start}. The unit will scan 1 page. Place the next document on the scanner glass and press {Set}. Repeat this until all the documents are scanned, then press {Start}.

When using the automatic document feeder, press {Start}.

LIf the document exceeds the memory capacity, the reservation for that document will be canceled. You must send the entire document manually.

Printing a confirmation report

A confirmation report provides you with a printed record of transmission results. To print the confirmation reports,

42