Panasonic DP-MB350 manual Poster feature Scanner glass only, Quick ID copy feature Start

5. Copier

LOther copy settings are also available. See page 36 for details.

7Quick ID copy feature:

1. {Start}

LThe unit will scan 1 page.

2.Place the next document on the scanner glass and press {Set}. Repeat this until all the documents are scanned.

LThe unit will start copying.

LYou can press {Start} anytime to start copying.

Easy repeat feature:

{Start}

8After you finish copying, press {Stop} to reset this feature.

Note:

LYou can save the previous page layout setting (feature #467 on page 67).

5.2.4 Poster feature (Scanner glass only)

You can make copies divided into 4 (“2⋅2”) or 9 (“3⋅3”) sections to make enlarged copies of the individual sections. You can then glue them together to make a poster.

1Set the original (page 19).

2Press {V} or {^} repeatedly to select “Page Layout”. i{<}/{>}

3Press {V} or {^} repeatedly to select “Poster”. i

{Set}

4Press {V} or {^} repeatedly to select “2⋅2” or “3⋅3”. i{Set}

5If necessary, enter the number of copies (page 36). L Other copy settings are also available. See page

36 for details.

6{Start}

7After you finish copying, press {Stop} to reset this feature.

Note:

LYou can save the previous page layout setting (feature #467 on page 67).

5.2.5 N in 1 feature

You can save paper by copying 2, 4 or 8 pages onto 1 page. The documents will be reduced to fit the recording paper.

1Set the original (page 19).

LTo make a portrait copy, set the original in portrait direction. To make a landscape copy, set the original in landscape direction.

2Press {V} or {^} repeatedly to select “Page Layout”. i{<}/{>}

3Press {V} or {^} repeatedly to select “N in 1”. i

{Set}

4Press {V} or {^} repeatedly to select the desired page layout.

–“2 in 1 (Portrait)”

–“2 in 1 (Landscape)”

–“4 in 1 (Portrait)”

–“4 in 1 (Landscape)”

–“8 in 1 (Portrait)”

–“8 in 1 (Landscape)”

5{Set}

6If necessary, enter the number of copies (page 36). L Other copy settings are also available. See page

36 for details.

7When using the scanner glass:

1. {Start}

L The unit will scan 1 page.

2. Place the next document on the scanner glass and press {Set}. Repeat this until all the documents are scanned.

L The unit will start copying.

L You can press {Start} anytime to start copying.

When using the automatic document feeder:

{Start}

8After you finish copying, press {Stop} to reset this feature.

Note:

LYou can save the previous page layout setting (feature #467 on page 67).

Separate N in 1 feature (Scanner glass only)

You can separate an N in 1 copied document back into its original, separate pages. This feature is available for documents created using the “2 in 1” and “4 in 1” settings.

1.Set the original (page 19).

2.Press {V} or {^} repeatedly to select “Page Layout”. i{<}/{>}

3.Press {V} or {^} repeatedly to select “Separate N in 1”. i{Set}

4.Press {V} or {^} repeatedly to select the desired page layout.

–“2 in 1 (Portrait)”

–“2 in 1 (Landscape)”

–“4 in 1 (Portrait)”

–“4 in 1 (Landscape)”

5.{Set}

6.If necessary, enter the number of copies (page 36). L Other copy settings are also available. See page

36 for details.

7.{Start}

40