Introduction and Installation | Panasonic DP-MB350 manual

1. Introduction and Installation

Important:

LPush down to lock the plate (5) in the standard input tray, if it has come up.

5

4

LMake sure that the recording paper guides (6) are at the paper size mark and the recording paper is under the paper limit mark (7). The paper should not be loaded over the tab (8).

6 8 7

6

5Insert the standard input tray into the unit, lifting the front part of the tray. Then push it completely into the unit.

Note:

LIf the paper is not loaded correctly, re-adjust the paper guides, or the paper may jam.

LIf the standard input tray does not close, the plate in the standard input tray may not be in the locked position. Push the paper down and make sure that the paper is lying flat in the standard input tray.

Caution for the standard input tray

LDo not drop the standard input tray.

LHold the standard input tray with both hands when removing or installing. The standard input tray weighs approximately 4.8 kg (10.6 lb) when fully loaded with recording paper.

For assistance, please contact an authorized Panasonic dealer.

15

Image 15

Panasonic DP-MB350 manual Introduction and Installation

Contents

Operating Instructions Copyright EnvironmentTrademarks Property of their respective owners For best performance For your safety It is unlawful to make copies of certain documents Moving the unitIllegal copies Routine care Single telephone line Telephone line 106 101102 103 Quick reference guide Supplied accessoriesAccessory information Toner cartridge Drum cartridge Button descriptions Display and buttons Display descriptions Rear view Power inletOverview Front view Supplied toner cartridge is a starter toner cartridge Toner cartridge and drum cartridge When to replace the toner cartridge and the drum cartridge Waste disposal method Toner save feature Moist paper Inkjet paper Recording paper Introduction and Installation Approx .8 kg 10.6 lb Connections Using surge protectorsUsing network router/network hub We recommend using network routers/network hubs Press Menu to exit Turning the power switch onDialing mode Turn the power switch to the on position Effective scanning area Selecting the operation mode Scan/Copy/FaxSetting the original Using the scanner glass Maximum document size Using the automatic document feederDocument weight Minimum document size Date and time Adjusting the volume Your logo You can turn this feature OFF feature #226 on Your fax number Configuring the unit to access the LANSetting up automatically with a Dhcp server Setting up manually Installing Multi-Function Station Setting the computer for PC fax receptionRequired computer environment Installing Multi-Function Station on a computer Starting Multi-Function Station Appears, click Continue To change the settingsTo select the default Email software OCR Path To select the OCR software Duplex printing Printing from Windows applications To print on labels Utilities iConfiguration Web Page i Network ConfigurationPrinting on special media To print on transparencies Printer Scan to Viewer Scanning from the unit Push Scan Scan to email address LAN connection only Scan to save as a fileScan to Email Scan to OCR Example Lisa Using navigator keyUsing dial keypad Scanning 2-sided originals automatic document feeder only Utilities iViewer Multi-Function Viewer will appear Using Multi-Function scan applicationUsing Viewer Scanning from a computer Pull Scan For WIA scanning Select From Scanner or Camera... from Using other applicationsFor Twain scanning Select Acquire Image... from the File menu Making a copy Original document When using the scanner glass, the unit will onlyUsing the automatic document feeder Example 70 % reduced copy Using the scanner glass More copying features Duplex featureCollate copy For details When using the scanner glass StartQuick ID copy feature Easy repeat feature Easy repeat feature Start Poster feature Scanner glass only1 feature Quick ID copy feature Start Booklet feature Copy reservationStart to start copying To redial the last number Redial Reserving the fax transmission Dual AccessWhen using the automatic document feeder, press Start Sending a fax manually To send 2-sided originals Sending from memory Quick scan featurePrinting a journal report Pre-dialing a fax number Erasing a stored item Storing items for the navigator directoryStoring navigator directory items Editing a stored item Adding a new item into the broadcast memory Sending a fax using navigator directoryBroadcast transmission Programming items into the broadcast memory To add other items, repeat this step up to 20 items To send the same document using the scanner glassErasing a stored item from the broadcast memory Sending the same document to pre- programmed parties Send Activating FAX only modeIf you have subscribed to a Distinctive Ring service Receiving a fax automatically Auto answer on Viewing a fax document Activating TEL modeReceiving a fax manually Auto answer OFF Displaying a received fax document Printing a fax document Saving a fax documentErasing a fax document Receiving a voice message and fax document in one call Using the unit with an answering machineSetting up the unit and an answering machine Connect the answering machine Storing undesired callers Activating the junk fax prohibitor Web fax preview LAN connection only Activating the fax preview modeProgramming the web fax preview access code Receiving a fax on your computer What , means Caller ID service Symbols and operations for caller informationHow Caller ID is displayed Menu Set Erasing caller informationErasing all caller information Erasing specific caller information Programming the ring pattern assigned for fax Distinctive Ring serviceUsing two or more phone numbers on a single telephone line Activating the Distinctive Ring feature Configuration Web ProgrammingSubmit 700ms default Basic features Counter view feature #484 on page 61 will not be reset No defaultActivating this feature To reset all features To select #1+#2 Paper type setting feature #383 onSetting feature #383 on Setting the default operation Programmable Features Calling charges may be higher than usual Fax featuresThis feature is not available for broadcast transmission Re-send the document Then press Set #412 Desired time Off default To send a document Type setting feature #383 on To beep when the memory is nearly full Connection, it will print the data Data after recognition of the computer connection Feature/Code Selection Setting the information for Copy features Overrides this featureTo change the setting again Beforehand Paper. Change the setting to Plain Paper or Thin PaperDesired paper input tray Repeatedly, then press Start That 80 characters in 10 cpi font may be printed on a line PC print features To each font Feature/Code Selection Setting the font number Address destinations via an Scan features Programmable Features LAN features Click Edit next to Approved Users Select the LAN Feature tabChange the mode and edit IP filtering information. iSubmit Interface Enter the Snmp community name. Consult your Network features LAN connection onlyFeature Tab Selection Setting the LAN LAN Feature Features Setting the community Enter the desired email checking interval for the scan to Status of the unit Using Remote ControlTo select characters using V or Character entry Canceling the operations Using Device MonitorUsing the web browser LAN connection only Lower input tray optional For Number of Input Tray, 2 will be selected Setting the lower input trayClick Auto Configuration on the Device tab. iOK For Windows 98/Windows Me/Windows 2000/Windows XP Report messages Display messages Display Cause & Solution Check that the computer is turned on Settings104 Check the connection between the computer and the unit Document into two or more sheets and try again Sided document / 360 mm 143/ of 2-sided document usingTransmission error occurred. Try again Document is jammed. Remove the jammed document General When a function does not work Printing problems Scanner 11.3.5 Fax Copier Automatically Problem Cause & Solution Cannot receive documentsConnecting, but faxes are Receiving mode Documents by pressing Problem Cause & Solution When an extension telephoneReceiving mode does not Is connected, I cannot receive Network If a power failure occurs Using an answering machine Continue Change settingsEasy installation Modify iNext Windows Firewall When the recording paper has jammed inside of the unit Recording paper jamDisplay will show the following Remove the jammed paper 5 carefully by pulling it upward Case When the recording paper has jammed near the rollersWhen the recording paper has jammed inside the fuser unit Remove the jammed paper 4 carefully by pulling it upward When the recording paper has jammed over the fuser unit Remove the jammed paper n carefully by pulling it upward Push up the green levers m to the original position Paper Jammed Open Tray #2 Left Cover Paper Jammed b Close the cover at the left side of the lower input tray When the recording paper is not fed into the unit properly Open the ADF cover 1 while holding the document cover When the document has jammed near the document entranceWhen the document has jammed near the document exit Document jams Automatic document feeder Cleaning the white plates and glass Clean the rollers when documents frequently misfeed Cleaning the document feeder rollers Reference lists and reports Specifications Recording paper weight Printing resolutionITU-T No.1 Test Chart Recording paper specifications Plain paper/Thin paper size Drum life Approx ,600 pages can be printed Information of copyrights and licenses 107 108 109 110 111 112 113 114 115 Index 117 118 119 PNQX2279ZA CM0709TM0 CD