6. Fax
46
LTo add other items, repeat this step (up to 20
items).
6{Back} i {Menu}
6.4.3 Erasing a stored item from the
broadcast memory
1{Menu}
2Press {V} or {^} repeatedly to select Directory
Set.
3Press {<} or {>} repeatedly to select
Broadcast. i {Set}
4Press {V} or {^} repeatedly to select the desired
broadcast memory location (<Broadcast1> to
<Broadcast5>). i {<}/{>}
LIf you changed the broadcast memory name
when programming, select that name.
5Press {V}, {^}, {<} or {>} repeatedly to select the
item that you want to erase.
LTo cancel erasing, press {Stop}, then press
{Menu}.
6{#} i {Menu}
Note:
LIf you erase all programmed items, the broadcast
memory name will return to the default name.
6.4.4 Sending the same document to pre-
programmed parties
LMake sure that the {Fax} light is ON.
To send the same document using the scanner glass
1. Set the original (page 19).
2. Press {<} or {>} to initiate the navigator directory.
3. Press {V} or {^} repeatedly to select the desired
broadcast memory location. i {Set}
4. If necessary, change the resolution (page 42) and
the contrast (page 42). i {Start}
LTo send a single page, go to step 6.
LTo send multiple pages, go to the next step.
5. Place the next page. i {Set}
LTo send more pages, repeat this step.
6. {Start}
Note:
LTo stop sending, see page 78.
LIf you select Fine, Super Fine or Photo
resolution, the number of pages that the unit can
send will decrease.
LIf the document exceeds the memory capacity,
sending will be canceled.
LIf a party is busy or does not answer, it will be skipped
and redialed later 1 time.
LAfter transmission, the unit will automatically print a
report (broadcast sending report).
To send the same document using the automatic
document feeder
1. Set the original (page 20).
2. Press {<} or {>} to initiate the navigator directory.
3. Press {V} or {^} repeatedly to select the desired
broadcast memory location. i {Set}
4. If necessary, change the resolution (page 42) and
the contrast (page 42).
5. {Start}