6. Fax
43
make sure that feature #401 is activated (page 62). For
an explanation of the messages, see page 81.
Printing a journal report
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually , see page 103.
To print it automatically after every 30 new fax
transmissions and receptions, make sure feature #402 is
activated (page 62). For an explanation of the
messages, see page 81.
6.1.2 Using the automatic document feeder
1If the {Fax} light is OFF, turn it ON by pressing
{Fax}.
2Set the original (page 20).
3If necessary, change the resolution and contrast
according to the type of document.
LTo select the resolution, see page 42.
LTo select the contrast, see page 42.
4{Monitor}
5Dial the fax number. i {Start}
Note:
LTo stop sending, see page 78.
LDo not open the document cover when sending a fax
with the automatic document feeder.
Pre-dialing a fax number
1. Enter the fax number.
2. Set the original (page 20). i {Start}
Sending from memory (Quick scan feature)
1. Set the original (page 20).
2. Enter the fax number.
3. Press {V} or {^} repeatedly to select “Quick
Scan”, then press {<} or {>} repeatedly to select
“On”. i {Start}
To send 2-sided originals
1. Set the original (page 20).
2. {Duplex}
3. Press {V} or {^} repeatedly to select the desired
binding of the original.
–“Long Edge”
–“Short Edge”
4. {Set}
5. Dial the fax number. i {Start}

{Monitor}

{Start}{Fax}{Set}{V}{^}{<}{>}

{Duplex}