Panasonic DP-MB350 manual Installing Multi-Function Station on a computer

2. Preparation

2.11.2Installing Multi-Function Station on a computer

LInstall Multi-Function Station (CD-ROM) before connecting the unit to a computer with the USB cable. If the unit is connected to a computer with the USB cable before installing Multi-Function

Station, the [Found New Hardware Wizard] dialog box will appear. Click [Cancel] to close it.

LThe screenshots shown in these instructions are

for Windows XP and are included for reference only.

LThe screenshots shown in these instructions

may differ slightly from those of the actual product.

LSoftware features and appearance are subject to

change without notice.

L If you are also using KX-MB271/KX-MB781/KX-

FLB881, see page 93.

1 Start Windows and exit all other applications.

LFor Windows 2000, Windows XP and Windows Vista users, you must be logged in as an administrator in order to install Multi-Function Station.

2Insert the supplied CD-ROM into your CD-ROM drive.

L If the [Select Language] dialog box appears, select the language that you want to use with this software. Click [OK].

L If the installation does not start automatically: Click [Start]. Choose [Run...]. Type “D:\Install” (where “D” is the drive letter of your CD-ROM drive). Click [OK].

(If you are not sure what the drive letter is for your CD-ROM drive, use Windows Explorer and look for the CD-ROM drive.)

3[Easy Installation]

LThe installation will start automatically.

4When the setup program starts, follow the on-screen instructions.

L Readiris OCR software (page 32) and Device Monitor (page 78) will also be installed.

5The [Connect Type] dialog box appears.

For USB connection:

1.[Connect directly with a USB cable.] i[Next] L The [Connect Device] dialog box will appear.

2.Connect the unit to a computer with the USB cable (1), then click [Next].

1

LIf the unit is connected to your computer, the

model name will be automatically detected.

LYou can change the name of the unit if necessary.

3.Click [Install], then follow the on-screen instructions.

LThe files will be copied to your computer.

For LAN connection:

1. [Connect via the Network.] i[Next]

LThe [Select a Network Device] dialog box will appear.

2.Check [Select in the searched list] and select the unit from the list.

LIf the name of the desired unit is not displayed on the list, and the IP address for the unit has been assigned, check [Direct input] and enter the IP address.

3.[Next]

LYou can change the name of the unit if necessary.

4.Click [Install], then follow the on-screen instructions.

LThe files will be copied to your computer.

Important notice

If you are using Windows XP or Windows Vista, a message may appear after connecting the unit with the USB cable. This is normal and the software will not cause any difficulties with your operating system. You can continue the installation with no problem. This kind of message is displayed:

LFor Windows XP users

“The software you are installing for this hardware

has not passed Windows Logo testing to verify its compatibility with Windows XP.”

LFor Windows Vista users

“Would you like to install this device software?”

To view or install the operating instructions data

1.Start Windows and insert the supplied CD-ROM into your CD-ROM drive.

2.Click [Operating Instructions], then follow the on- screen instructions to view or install the operating instructions in PDF format.

For assistance, please contact an authorized Panasonic dealer. 25