A&D EJ-2000, EJ-6100, EJ-440 manual EJ-07 / EJ-08 Underhook, EJ-11 Breeze break, EJ-12 Carrying case

9-3. EJ-07 / EJ-08 Underhook

By attaching the underhook to the bottom of the balance, large objects that are difficult to load on the weighing pan can be weighed, and the density (specific gravity) of objects may be measured. Refer to the “9-6. EJ-13 Density Determination Kit” for the information about the density measurement.

‰EJ-07 is for use with the EJ-3000 / EJ-4100 / EJ-6100.

‰EJ-08 is for use with the EJ-1500 / EJ-2000.

‰The calibration with a weight being hung on the hook is required for an accurate weighing.

EJ-07 / EJ-08 Installation

Open the cap on the bottom of the balance, and screw the underhook into the mounting hole.

Remove the cap.

Caution EJ-07 EJ-08

‰Do not apply excessive force to the underhook.

‰When not in use, remove the underhook and attach the cap to prevent dust from getting into the balance.

9-4. EJ-11 Breeze break

EJ-11 will be used mainly for min. display 0.01 g models. But all of EJ series can use this option unit.

‰Remove the fixing frame out.

‰Attach the breeze break frame instead of the fixing frame.

‰ Attach the breeze break to the balance.	Breeze break
Fixing frame

Breeze break frame

9-5. EJ-12 Carrying case

EJ-12 is available for the convenience of carrying the balance by hand. However, note that because these balances are precision equipment, they will not be able to withstand excessive shock, such as being dropped.

26