A&D EJ-6100, EJ-440, EJ-3000, EJ-4100, EJ-120, EJ-2000, EJ-1500 manual Class

Class	Item	Param-		Description
			eter
func	aCai		0	ACAI disabled	If “0” is set,
	ACAI function	Š	1	ACAI enabled	no additional samples
					required.
	Umin	Š	0	1 d	d = the minimum
	Minimum unit		1	1/10 d	display division
	weight		2	( )
				total sample weight ≥5d **
	smpl	Š	0	10 pcs	The number of
	Sample number		1	25 pcs	samples shown
			2	50 pcs	first	when	entered
					into	the unit	weight
			3	100 pcs
					storing mode
			4	5 pcs
	ldin	Š	0	Water temperature	The	way to input
	Liquid density input		1	Liquid density	liquid density.
	ltUp		0	Always off	To control how the
	LCD Backlight		1	Turns off after 5 seconds	LCD backlight turns
	control				off. Weight		change
			2	Turns off after 10 seconds
					or key operation will
		Š	3	Turns off after 30 seconds
					turn	the backlight
			4	Turns off after 60 seconds
					on.
			5	Always on
CpHi	Comparator upper limit			Setting the upper limit value	See
Cplo	Comparator lower limit			Setting the lower limit value	“6. COMPARATOR”
Unit	Weighing units to be displayed			Sets to display units	See “8-4. Storing
					weighing units”
id	ID number for GLP output			Sets the ID number	See “10. ID
					NUMBER AND GLP”

ŠFactory setting

(**)	Even if the weight display is “5d”, the sample weight may not be accepted.
	This is because the weight display data is rounded off internally.

21