A&D EJ-6100, EJ-440, EJ-3000, EJ-4100, EJ-120, EJ-2000, EJ-1500 manual 20000 20000 end

2.

CC 0

is displayed.

CC 0

3.If necessary to change the weight value to check, press the change the weight value using the following keys.

SAMPLE

key and

SAMPLE		key	To select the digit blinking to change.
		key	To set the value of the digit selected.
RE-ZERO
	key		To store the value and return to step 2.
PRINT

4. At step 2, press the PRINT key. The zero point is weighed and the weighed value is displayed for a few seconds.

With nothing on the pan

The weighed data is shown with “g”.

5.Place the displayed weight on the pan and press the

PRINT key to weigh it. The weighed value is displayed for a few seconds.

The weighed data is shown with “g”.

6. end appears.

CC 0

00.

20000.

Displayed weight

20000.

20000.

end

7.glp

output.

8.end press the mode.

is displayed and calibration test report is

appears again. Remove the weight and MODE key to return to the weighing

glp GLP output

end

Returns to

the weighing mode

33