Key mode
Set the function “prt 1, 2 or 3”.
When the PRINT key is pressed while the weighing data is stable (the STABLE indicator is on), the balance transmits the data. When the data is transmitted, the display will blink one time.
Set the function “prt 2”.
The balance transmits the weighing data when the display is stable (the STABLE indicator is on) and the data is greater than +4d.
The next output can be obtained after the display returns below +4d.
Set the function “prt 3”.
The balance transmits the weighing data when the display is stable (the STABLE indicator is on) and the data is greater than +4d or less than
The next output can be obtained after the display returns between
Command mode
In the command mode, the balance is controlled by commands that come from the personal computer and so on.
Command list
Command to request the current weighing data.
Command
Reply
Q CR LF
S | T | , | + | 0 | 0 | 1 | 2 | 3 | 4 | . | 5 |
|
|
|
|
|
| g | CR | LF |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Command to zero or tare the balance (same as the
Command Z CR LF
RE-ZERO
key).
Reply
Z CR LF
Command to change the weighing units (same as the
Command | U | CR | LF |
|
| ||
Reply | U | CR | LF |
MODE
key).
25
