A&D EJ-6100, EJ-440, EJ-3000, EJ-200 manual Unit, end id, Storing weighing units, func, ‰ Note

8-4. Storing weighing units

It is possible to store the weighing units that will be actually used from the units available. For the units available, see “5-3. Units”.

Select and store the weighing units as described below:

1.Press and hold the func .

SAMPLE

key to display Press and hold

2.Press the Unit

.

SAMPLE

func

key several times to display	Press
	several times

3. Press the

PRINT

Unit

key.

4.Press the SAMPLE key to display a weighing unit to be stored.

5. Press the RE-ZERO key to select the weighing unit. The selected weighing unit is shown with the STABLE indicator.

‰At this stage, the weighing unit is not stored in memory.

6.Repeat steps 4. and 5. to store all weighing units to be used.

7. Press the		PRINT	key to store the selected weighing
	units in memory.
	id	appears after		end	.

8.Press the UNITS key to return to the weighing mode.

‰Note

When the balance is switched on, it starts with the unit that was stored first at step 5.

Unit

Each pressing switches the units available in the order described on 5-3.

Unit

To select

To store

end id

Returns to

the weighing mode

19