A&D EJ-6100, EJ-440, EJ-3000, EJ-200, EJ-4100 Net, Selecting a weighing unit, Basic operation

5-4. Selecting a weighing unit

Press the UNITS key to select a unit.

The following sections are a description of the three common units: g (gram mode), pcs (counting mode), and % (percent mode).

Each pressing switches the units available in the order described on the previous page.

5-5. Basic operation

1.Select a weighing unit.

2.When the display does not show zero, press the

RE-ZERO key to set the display to zero.

3.When using a tare (container), place the container on the weighing pan, and press the

RE-ZERO key to subtract the tare weight.

4.Place the object to be weighed on the pan or in the container.

Wait for the STABLE indicator to be displayed and read the value.

5.Remove the object from the pan.

‰The RE-ZERO key will zero the balance if the weight is within ±2% of the weighing capacity around the power-on zero point. The ZERO indicator turns on. When the weight exceeds +2% of the weighing capacity, it will be subtracted to zero as a tare weight. In this case the ZERO and NET marks turn on.

ZERO 00. STABLE indicator

Container

Weighing pan

NET	00.
ZERO

NET 1503.

STABLE indicator

Precautions during operation

‰Make sure that the STABLE indicator is on whenever reading or storing a value.

‰Do not press the keys with a sharp object such as a pencil.

‰Do not apply a shock or a load to the pan that is beyond the weighing capacity.

‰Keep the balance free from foreign objects such as dust or liquid.

‰Calibrate the balance periodically to keep weighing accuracy. (See “7. CALIBRATION”.)

9