SECTION 6 |
|
|
|
| DriveRack |
| |
|
| ® |
|
| Remote Control |
|
|
To make operation of the DriveRack 260 even more convenient, dbx includes the option of using the DriveRack PC GUI software (DriveWare™) and/or Zone Controllers (sold separately). The following section contains some basic information regarding the utilization of the DriveWare™ software including: install, system requirements, cable specifications, basic operation and setup for dbx Zone Controllers.
6.1.1 DriveWare™ PC Software GUI
MINIMUM SYSTEM REQUIREMENTS
•266mhz PC processor
•16 bit color monitor
•64 meg RAM
•Windows™ 95 OS R2 or newer - Windows™ NT 4.0 or newer
•Baud Rate (fixed) 38400
Note: The COM (communication) port must be consistent. This means that when the GUI is in use, any other software applications that use the
INSTALLATION
•Insert the included CD ROM into your computer’s CD drive. You can also download the DriveWare software GUI from our website at www.dbxpro.com.
•Once the software is downloaded or CD is loaded, double click the DriveWare Setup file.
•The application will proceed to ask you where you want the program installed. The default location is advised, but if you do prefer to install the software in a different location, select it here.
CONFIGURATION I
•Once the software installation has completed, go into Window’s Device Manager>Ports. Take note of which COM port number your COM port is assigned to (you may need to change DriveWare’s preferences to match this COM port assignment number). Double left click on your COM port from the Device Manager list and set your COM Port’s Properties as shown below:
| • It is recommended that you now shut down your computer. |
50 | DriveRack® User Manual |