DriveRack | ® | Utilities/Meters | Section 5 |
|
| ||
|
|
| |
| Panel 1 |
| |
| Switch 1 2 3 4 |
| |
| No Change |
|
|
•Pressing and then rotating the DATA wheel will allow you to first select the latch switch combination in binary. Pressing the DATA wheel again and rotating it then allows you to assign this binary switch combination to a program to be loaded. Repeat this process for all other binary switch combination/program assignments. Press the STORE button to get back to ZC Setup
•When done, press the PROGRAM/CONFIG button to return to the main Program Screen.
For more information regarding Zone Controllers, including wiring and dip switch settings, please see section 6.2.
5.1.4 Security
The DriveRack 260 does provide a quick front panel System Lockout feature (see Appendix A.2 for information on this feature). However, this System Lockout feature requires that the processor be power cycled to lock/unlock the device. Therefore, the DriveRack 260 also provides you with an additional password protected security feature to protect all detailed parameter editing and configuration modification settings of your DriveRack unit. The Utility menu of the DriveRack system includes a complete security system
Prior to setting security passwords you will access the security menu by pressing the UTILITY button. Then use the PREV PG or NEXT PG buttons to move to the first page of the security/ password pages of the Utility section. The display will appear as follows:
Set Security Level
Pre EQ
Low
•Note that the arrow indicates the currently selected parameter for editing. To select parameters to edit from the current page, press the DATA wheel until the arrow is next to the parameter that you wish to edit.
DriveRack® User Manual |
| 43 |
|
|