JBL 260 DriveRack, Section, Application Guide, Stereo w/ four Aux Zones, Hardware, Software

Section 7
		DriveRack
		®
	Application Guide

7.3 Stereo w/ four Aux Zones

Hardware

1.Connect the outputs from the mixer to the inputs of the DriveRack.

2.Connect the outputs of the DriveRack and run to the selected speaker amplifier.

3.Making sure that all outputs are muted, apply power to the mixer and amplifiers.

4.Make connections between the Zone Controllers (see Section 6.2) and the 260.

Software

1.Select a program (Factory: 2x2 w/ 4 Zones) as a template.

2.Load the program by pressing the PROG/CONFIG button.

3.Save multiple copies of this program to be recalled by the ZC-3 Controller.

4.Adjust the individual parameters for each of the programs by pressing the Processing Module buttons.

5.Using the Utility Menu, select the ID for each ZC-1 and ZC-2 Zone Controller and program its output level boost and cut parameters.

6.Using the Utility Menu, select the ID for the ZC-3 Zone Controller and select the programs that the ZC-3 will load from each of its positions.

Left Right

2 3 4 5

dbx ZC-3

MA-5002VZ

JBL AE Series

AC2215/64

dbx ZC-1

JBL Control 26C Ceiling Speaker

Zone A

dbx ZC-2

JBL Control 26C Ceiling Speaker

Zone B

dbx ZC-1

JBL Control 26C Ceiling Speaker

Zone C

dbx ZC-2

JBL Control 26C Ceiling Speaker

Zone D

62 DriveRack® User Manual