JBL 260 DriveRackSection, Editing Functions, Navigating the Pre-EQSection 28-GEQand PEQ, Geq/Peq

DriveRackSection 2

®

Editing Functions

2.3 Navigating the Pre-EQ Section (28-GEQ and PEQ)

To edit the parameters of the EQs used in a selected program, simply use the following procedure. From program mode, press the EQ button to reach the EQ module to be edited. Successive presses of the EQ button will move through each channel.

Navigate through the Pages of the selected EQ section by depressing "Next Page" or "Prev Page" successively until arriving at the desired Page.

EQ

The EQ button toggles through

the EQs used in
	EQ
each channel of
the selected
program
menu.

GEQ

or

PEQ

GEQ On/Off	Freq- 31.5Hz-18kHz
Flatten/Restore	Gain -12dB to12dB
PEQ On/Off		B1 Freq- 20Hz-20kHz
Flatten/Restore		Gain -12dB to12dB
Bell,HSelf, LShelf, LHShelf,		Q .20 to 16.0

GEQ/PEQ

B2 Freq- 20Hz-20kHz	B2 Freq- 20Hz-20kHz	...
Gain -12dB to12dB	Gain -12dB to12dB
Q .20 to 16.0	Q .20 to 16.0

Successive presses of the Data wheel will select effect parameters within the currently selected page.

2.4 Navigating the CROSSOVER Section

To edit the parameters of the Crossover used in a selected program, simply use the following procedure. From program mode, press the X-OVER button. Once you have reached the Crossover module, Navigate through the Pages of the selected Crossover module by pressing the "Next Page" or "Prev Page" buttons successively until arriving at the desired Page.

The XOVER button	XOVER
toggles through
the XOVER used in
each channel of
the selected
program
menu.

XOVER

Low Pass	High Pass
Freq- 19.7kHz to Out	Freq- 20.kHz to Out	Gain- -20 to 20dB	Repeat, for each crossover band
Slope-BS, BW, LR	Slope - BS, BW, LR
(6,12,18,24,36,48)	(6,12,18,24,36,48)

Successive presses of the Data wheel will select effect parameters within the currently selected page.

DriveRack® User Manual 15