Programming Methods

WinLoad Installer Upload/Download Software

Program the Magellan console remotely or on-site using the WinLoad Installer Upload/Download Software for Windows®. For more information, contact your local Paradox Distributor or visit our Web site at www.paradox.ca. If you are using the WinLoad software, you must program the features explained on page 33.

Please refer to WinLoad’s Online Help for more information on using WinLoad.

Programming Using the Built-in Keypad

Use the built-in keypad to access Magellan’s programming mode.

Use the supplied Magellan Programming Guide to keep track of which sections were programmed and how.

To access programming mode:

1.Press and hold the [0] key.

2.Enter your [INSTALLER CODE] or [MAINTENANCE CODE].

3.Enter the 3-digit [SECTION] you wish to program.

4.Enter the required [DATA].

There are two methods that can be used to enter data when in programming mode; Single Digit Data Entry and Feature Select Programming methods.

Single Digit Data Entry Method

After entering programming mode, some sections will require that you enter decimal values from 000 to 255. Other sections will require that you enter hexadecimal values from 0 to F. The required data will be clearly indicated in this manual as well as in the Magellan Programming Guide. When entering the final digit in a section, Magellan will automatically save and advance to the next section. Table 1 (see below) shows the keys and their equivalent decimal and/or hexadecimal value.

Table 1: Decimal and Hexadecimal Values

Key

Value

Key

Value

 

 

 

 

 

 

 

 

[1]

1

[9]

9

 

 

 

 

[2]

2

[0]

0 (decimal)

 

 

 

Space (Hexa decimal)

 

 

 

 

[3]

3

[1] CK*

A (Hexadecimal only)

 

 

 

 

[4]

4

[2] CK*

B (Hexadecimal only)

 

 

 

 

[5]

5

[3] CK*

C (Hexadecimal only)

 

 

 

 

[6]

6

[4] CK*

D (Hexadecimal only)

 

 

 

 

[7]

7

[5] CK*

E (Hexadecimal only)

 

 

 

 

[8]

8

[6] CK*

F (Hexadecimal only)

 

 

 

 

*CK = Center keypad

Feature Select Programming Method

After entering certain sections, eight options will be displayed where each option from [1] to [8] represents a specific feature or option. To manipulate the options:

•Press the key corresponding to the desired option and the option number will appear in the LCD display. This means the option is ON. Press the key again to remove the digit from the LCD display, thereby, turning OFF the option.

•Press the [*] key to set all eight options to OFF. Press the keys until the current section’s options are set. When the options are set, press the [#] key to save and advance to the next section.

•Press the [*] key twice to exit without changing any data.

Programming Using a Paradox Memory Key

The Paradox Memory Keys (PMC-3) are very useful when multiple Magellan consoles are to be programmed identically.

Rather then programming each console by entering its programming mode and then scrolling through programming sections, use a memory key to program each console. The programming of a console with a memory key takes approximately three seconds.

There are two actions that can be performed with a memory key.

Download Data to Destination Console

To download the data of a memory key into a console:

1.Remove power from the Magellan console (AC and battery) and connect the memory key to the 5-pin connector on the left side of the back of the console (see Figure 10 on page 9).

2.Re-apply both AC and battery power to the console.

3.Press the [OK] key and Magellan will begin downloading the data from the memory key.

Copy Data to Memory Key from Source Console

To copy the contents of a console into the memory key.

1.Remove power from the Magellan console (AC and battery) and connect the memory key to the 5-pin connector on the left side of the back of the console (see Figure 10 on page 9).

2.Re-apply both AC and battery power to the console.

3.Press the [NEXT] key and then the [OK] key. Magellan will begin copying its data into the memory key.

The installer code of the Magellan console used to download data to the memory key must be the same installer code programmed in the Magellan console that is to download the contents from the same memory key. If the installer codes do not match, the contents of the memory key cannot be downloaded into the receiving console.

Example: The contents of the Magellan console A will be copied into memory key B. The installer code for console A is 111111. In order to download the contents of memory key B into the Magellan console C, the installer code programmed in console C must also be 111111.

Paradox Magellan Systems

11

Page 12 Page 14
Page 13
Image 13
Magellan MG-6060 Programming Methods, WinLoad Installer Upload/Download Software, Programming Using the Built-in Keypad
Page 12 Page 14

MG-6060 specifications

The Magellan MG-6060 is a sophisticated GPS tracking device designed to enhance navigation and tracking capabilities for both individual users and businesses. With its advanced features and robust technology, the MG-6060 stands out in the market, catering to a diverse range of applications, including fleet management, personal tracking, and outdoor adventures.

One of the key highlights of the MG-6060 is its superior GPS accuracy. Utilizing a high-sensitivity GPS receiver, this device can provide precise location information, ensuring that users can track their assets in real time. Whether you’re managing a fleet of vehicles or keeping an eye on a loved one, the MG-6060 offers reliable tracking capabilities.

The device is equipped with cellular network communication, enabling seamless data transmission. This means that users can access their tracking information via a dedicated app or web platform, allowing for easy monitoring and management. The user-friendly interface of the accompanying software makes it simple to visualize tracking data, set up geofencing alerts, and receive real-time notifications.

Battery life is another important characteristic of the MG-6060. It features a long-lasting rechargeable battery that can provide extended usage times, making it suitable for various tracking applications. Users can enjoy the convenience of extended periods without needing a recharge, which is especially valuable in outdoor environments.

Durability is also a standout feature of the MG-6060. It is designed to withstand harsh conditions, making it perfect for rugged outdoor use. With an IP67 rating for water and dust resistance, the device can operate effectively in tough environments, ensuring that it remains functional regardless of the circumstances.

Moreover, the MG-6060 supports both GPS and GLONASS systems, offering enhanced satellite connectivity. This dual-constellation capability significantly improves positioning accuracy and reliability, especially in urban settings where tall buildings can obstruct satellite signals.

In summary, the Magellan MG-6060 stands out with its precise GPS tracking capabilities, user-friendly software, long battery life, and durable design. Its advanced features make it suitable for a variety of applications, positioning it as a versatile tool for effective tracking and navigation. Whether for personal use or business needs, the MG-6060 provides functionality that users can rely on in all situations.
Top Page Image Contents