Table 8: Special Keys for Telephone Numbers
Keys to press | Action or Value |
|
|
[*] | * |
|
|
[#] | # |
|
|
Center [ACTION] (pause) key | Add a |
| telephone number. Press the key and |
| a “P” will be inserted into the |
| telephone number |
|
|
Central Station Telephone Numbers (CSTNs)
Section [111] = Central Station Telephone Number 1 Section [112] = Central Station Telephone Number 2
The Magellan console uses the CSTNs (Central Station
Telephone Numbers) programmed in sections [111] and/or [112] to connect and communicate with the central monitoring station. The following situations also apply:
•If after eight attempts of calling one central station telephone number have failed, the console will then dial the backup telephone number (if section [099] option [1] is enabled. See CSTN 2 as Backup Number on page 26).
•If the Alternate Dial option (page 28) is enabled, the console will dial the programmed backup telephone number after every failed attempt (if section [099] option [1] is enabled. See CSTN 2 as Backup Number on page 26).
•If no backup telephone number is programmed, the console will never report to the backup telephone number.
For more information on how these telephone numbers are used, please refer to Event Call Direction on page 27 and Reporting Formats on page 27. Also refer to Delay Between Dialing Attempts on page 28.
CSTN 2 as Backup Number
Section [099]: Option [1]
Option [1] OFF =Use CSTN 2 as a central station telephone number only
Option [1] ON = CSTN 2 can be used a backup telephone number (default)
CSTN 2 can also be used as a backup telephone number. If section [099] option [1] is enabled (ON) the console will use CSTN 2 as a backup telephone number.
For more information, please refer to Central Station Telephone Numbers (CSTNs) on page 26 and Alternate Dial Option on page 28.
Pager Telephone Number
Section [113]
The Magellan console uses the Pager telephone number programmed in section [113] to connect and communicate the numeric pager message programmed in section [114] (see Pager Reporting Message on page 26) to a pager.
Pager Reporting Message
Section [114]:
Program the desired numeric message you wish to send whenever the console dials the Pager telephone number in
section [114]. If the message is less than 32 digits, press the left [ACTION] key (ok) to save the message.
Voice Message Telephone Numbers
The Magellan console will use the Voice Message telephone numbers (which are programmed in the Installer menu. Refer to the Magellan Quick Setup Guide for more information) to play a
•The console will only dial a Voice Message telephone number when the system is in alarm. The console begins with the first programmed Voice Message telephone number.
•When the call is connected, the console will play the pre- recorded message and the zone labels of all the zones that are in alarm.
•The person at the other end of the telephone must acknowledge the call by pressing the [#] key on their telephone.
•The console will repeat the message a programmed amount of times (see Voice Message Repetitions on page 26) if no acknowledgement is immediately received.
•If no acknowledgement is received before the number of repetitions has elapsed, the console will then call the next programmed Voice Message telephone number and repeat the process.
•After calling the last programmed Voice Message telephone number without an acknowledgement, the console will once again call the first Voice Message telephone number and repeat the process a maximum of three times.
•If no acknowledgement is received after the third time, the console will generate a Fail to Comm. event and trouble.
Voice Message Repetitions
Section [079]: 001 to 255 repetitions; Default = 3 repetitions
This feature determines the amount of times the console will repeat the
Service Telephone Number
Section [119]
When there is a trouble in the system that requires servicing from your installer, the console will offer you the option of calling the telephone number programmed in section [119]. After selecting the option, the console becomes a
Refer to the Magellan User Guide for more information on using this feature.
Console Account Number
Section [107]
All report codes are preceded by a
26 | Reference & Installation Manual |