Wireless Programming
The Magellan system supports up to 16 wireless zones and two wireless doorbells. These wireless zones are monitored using transmitters such as wireless detectors and door contacts. The Magellan console only supports the Paradox Magellan series of wireless transmitters. The programming of the transmitters is accomplished in two steps:
1.Assign the wireless transmitter to Magellan.
2.Program the wireless zone.
Assigning Wireless Zone Transmitters
Sections [021] to [036]: Zones
Sections [021] to [036] represent zones 1 to 16. A wireless transmitter assigned to a section ([021] to [036]) will be assigned to the zone represented by the section.
For example, a wireless transmitter assigned to section [025] will be assigned to zone 5.
To assign a wireless transmitter:
1.Access the installer programming mode (page 11).
2.Enter the [SECTION] corresponding to the desired zone.
3.Enter the
The serial number is located on the inside of the wireless transmitter.
The wireless transmitters must be activated once having been assigned to the Magellan console. To activate a transmitter, insert the batteries and close the cover. To ensure proper synchronization between the console and the transmitter, open and close the zone corresponding to the transmitter.
Are the zones that have wireless transmitters assigned to them programmed? See Zone Definitions on page 13 and Zone Options on page 15.
Wireless transmitters can also be assigned through the Installer menu. Press [MENU] + [4] + [INSTALLER CODE] + [6]. Select the zone you wish to assign the transmitter to, press [OK], open the cover of the transmitter and then close the cover. The transmitter has been assigned. Refer to the Magellan Quick Setup for more information on the Installer menu and the assignment of the wireless transmitters.
3. Enter the
Wireless Doorbell Tones
Section [096]: Options [1] to [4]
Options [1] and [2] = Set tone for wireless doorbell 1 Options [3] and [4] = Set tone for wireless doorbell 2
Section [096] options [1] to [4] set the tones that will be played when Magellan receives a signal from either wireless doorbell 1 or 2 or both. Magellan comes with four tones. Refer to Table 3 on page 17 to set the desired tone.
Table 3: Wireless Doorbell Tones
Section [096] - Options [1] and [2] | Doorbell Tone # | |||
|
|
| ||
Option [1] OFF / Option [2] | OFF (Doorbell 1) | Tone 1 (default) | ||
|
|
| ||
Option [1] OFF / Option [2] | ON (Doorbell 1) | Tone 2 | ||
|
|
| ||
Option [1] ON / Option [2] | OFF (Doorbell 1) | Tone 3 | ||
|
|
| ||
Option [1] ON / Option [2] | ON (Doorbell 1) | Tone 4 | ||
|
| |||
|
|
|
|
|
Section [096] - Options [3] and [4] | Doorbell Tone # | |||
|
|
|
| |
Option [3] | OFF / Option [4] | OFF (Doorbell 2) | Tone 1 | |
|
|
|
| |
Option [3] | OFF / Option [4] | ON (Doorbell 2) | Tone 2 (default) | |
|
|
|
| |
Option [3] | ON / Option [4] | OFF (Doorbell 2) | Tone 3 | |
|
|
|
| |
Option [3] | ON / Option [4] | ON (Doorbell 2) | Tone 4 | |
|
|
|
|
|
Deleting Assigned Wireless Transmitters
Sections [021] to [036]: Zones
Sections [058] and [059]: Wireless Doorbells 1 and 2
To delete an assigned wireless transmitter:
1.Access the installer programming mode (page 11).
2.Enter the [SECTION] corresponding to the desired zone or doorbell.
3.Press the [0] key six times to clear the wireless transmitter’s serial number.
Assigning Wireless Doorbells to the Console
Sections [058] and [059]: Wireless Doorbells 1 and 2
Magellan supports the use of two wireless “doorbells”. By connecting a pushbutton to the Universal Transmitter inputs of a Magellan Wireless Door Contact
Please refer to the appropriate Magellan Wireless Door Contact Instruction for information on the installation and configuration of the wireless door contact.
To assign a wireless doorbell:
1.Access the installer programming mode (page 11).
2.Enter the [SECTION] corresponding to the desired doorbell.
Viewing Wireless Transmitter Signal Strength
Sections [021] to [036]: Zones
Sections [058] and [059]: Wireless Doorbells 1 and 2
Once wireless transmitters have been assigned to the Magellan console, the signal strength of each transmitter can be verified in sections [021] to [036] (zones 1 to 16 respectively) and sections
[058]and [059] (wireless doorbells 1 and 2 respectively). Each section represents the signal strength viewer for the wireless transmitter assigned to the corresponding zone.
For example, section [021] is the viewer for the wireless transmitter assigned to zone 1 and section [036] is the viewer for the wireless transmitter assigned to zone 16.
Paradox Magellan Systems | 17 |
