Installation
AC Power
Magellan requires a 9Vac (1A/9VA) or 16.5Vac (20VA) transformer (not included) to supply power to the console. Connect the transformer to the AC terminals as shown in Figure 1 on page 6.
Magellan can also be powered through a DC power supply. Connect a 12Vdc to 18Vdc to the AC terminals to power the console.
Do not use any
Figure 1: Connecting the Transformer
Back view of the Magellan console.
Do not use any switch- controlled outlets.
9Vac (1A/9VA) to 16Vac (20VA) transformer
Insert the transformer’s wires into the AC terminals.
Backup Battery Pack
Magellan uses a backup battery pack to provide power during a power loss. A 7.2Vdc 1.8 to 2.0Ah NiMH (Nickel Metal Hydride) rechargeable battery pack is included with the Magellan console. Connect the battery pack as shown in Figure 2 on page 6.
Connect the backup battery pack after applying AC power.
Figure 2: Connecting the Backup Battery
Partial view of the backside of the Magellan console
1.Insert the backup battery’s plug into the connector labeled BATT.
Figure 2: Connecting the Backup Battery (cont’d)
2.Slide in the battery pack horizontally, tilt the battery pack downward and then tuck it in Magellan’s battery compartment.
3.Tuck the cables in the specially designed slot.
Partial view of the backside of the Magellan console
4.Snap in the battery
compartment cover when finished.
Telephone Line Connections
The Magellan console can be connected to a telephone line by connecting the telephone company’s wires directly to Magellan’s dialer or by connecting a standard
Direct Connect
Connect the telephone line through an RJ31X jack as shown in Figure 3 on page 6.
Figure 3: Telephone Line Direct Connect
Back view of the Magellan console.
To connect the telephone line:
1.Connect an RJ31X to the R- 1,
2.Connect the telephone company wires and the home telephone to the RJ31X.
6 | Reference & Installation Manual |