UTStarcom CDM1450 manual Security, Support Service, Information, Handset Lock, KEY Lock

SETTINGS

2.Press “Settings”.

•Set Bluetooth: Turn Bluetooth on or off.

•Handset’s Visibility: Select “Hidden” or “Shown to all”.

•Handset’s Name: Edit the name of the device.

3.Press Left Soft Key [Save] to save the settings.

SUPPORT SERVICE

1.Press Left Soft Key [Menu], then press “Settings”.

Press “Bluetooth“.

2.Press “Support service”.

•Headset serivce: This is providing support for the popular Bluetooth headsets to be used with mobile phones. When connected and configured, the headset can act as the remote device an audio input and output interface.

•Hand free service: This is used to allow car hands-free kits to communicate with mobile phones in the car. In the car, the stereo is used for the phone audio and a microphone is installed in the car for sending outgoing audio.

INFORMATION

1.Press Left Soft Key [Menu], then press “Settings”.

Press “Bluetooth“.

2.Press “Information”.

3.View information. To return preview to the previous page,

press Right Soft Key [Close].

SETTINGS

SECURITY

Use these settings to prevent unauthorized use of your phone.

HANDSET LOCK

Turn on the lock to prevent the phone from being used without entering the password first.

1.Press Left Soft Key [Menu], then press “Settings”.

Press “Security”. Enter your password.

The default password is the last 4 digits of your phone number.

2.Press “Handset lock”.

3.Highlight “Off”, “When switch on”, or “Immediately” then

press Left Soft Key [Select] to save the setting.

•Off: Do not lock the handset.

•When switch on: Lock the phone when switch on.

•Immediately: Lock the phone now.

KEY LOCK

To set Key Lock:

1.Press Left Soft Key [Menu], then press “Settings”.

Press “Security”. Enter your password.

The default password is the last 4 digits of your phone number.

2.Press “Key lock”.

3.Highlight “Off”, “20sec”, “30sec” “1min” or “3min” then

press Left Soft Key [Select] to save the setting.

70 71