UTStarcom CDM1450 manual Speed Dials, Change Ringer, Erase Group, Press Assign

CONTACTS

CHANGE RINGER

1.Press Left Soft Key [Menu], then press “Contacts.”.

2.Press “Group settings”.

3.Select an existing group name.

4.Press Right Soft Key [Options], then scroll to Ringtone and

press .

5.Press Right Soft Key [Play] to play ringtone.

Select ringtone and press Left Soft Key [Select].

ERASE GROUP

1.Press Left Soft Key [Menu], then press “Contacts.”.

2.Press “Group settings”.

3.Select an existing group name. Only new groups you added can be changed. The default groups Personal, Family and Business cannot be deleted.

4.Press Right Soft Key [Options], then scroll to Erase and

press .

5.“Erase?” will be displayed. Select "Yes" and press to erase the group.

CONTACTS

SPEED DIALS

In idle mode, calls can be placed to numbers stored in Speed Dial by pressing & holding the location number on the key pad.

For a 2-digit location number, press the first number, then press and hold the second number.

	Speed Dial must be activated.
Note

1.Press [Menu], select “Contacts”, then “Speed dial”.

2.To assign a phone number to a location, select the location then

press [Assign].

	“Unassigned” appears if the location is available.
Note

3.Highlight a name from your contact list. If the contact has more

than 1 number saved, press the Navigation Key up or down

/ until the correct number for the Speed Dial location is shown.

4.Press [Done] to save the number to the Speed Dial location. You will see the contact name next to the Speed Dial location number in the Speed Dial lists.

42 43