UTStarcom CDM1450 manual Power Connection, CORRECT/INCORRECT Finger Position

BATTERY USAGE (BATTERY CHARGING)

POWER CONNECTION

1.Plug the AC Charger into a standard outlet.

2.Plug the other end of the AC Charger into the charging port on your the right side of your phone. The battery must be installed onto the phone to work properly.

Hot Key • When you charge the battery with the phone powered off, you will see a charging status screen. You cannot operate the phone until it is powered on.

•The battery is not charged at the time of purchase.

•Fully charge the battery before use.

•It is more efficient to charge the battery with the handset powered off.

•The battery must be connected to the phone in order to charge it.

•Battery operating time gradually decreases over time.

•If the battery fails to perform normally, you may need to replace the battery.

BLOCKING ANTENNA WHILE MAKING A CALL

CORRECT/INCORRECT FINGER POSITION

	CORRECT FINGER POSITION		INCORRECT FINGER POSITION
Note		Your phone is equipped with an intenna. For optimal call quality, hold the
		phone by the gripped edges on the side and avoid touching the top and
		bottom of the phone.

14 15