UTStarcom CDM1450 manual Making a Call Through Contact List, Contacts, ONE-TOUCH/TWO-TOUCH Dialing

MAKING A CALL THROUGH

THE CONTACT LIST

ONE-TOUCH/TWO-TOUCH DIALING

Ideal for frequently dialed numbers, this feature allows entries in your contact list to be dialed via the keypad with only one or two key presses. In order for One-Touch/Two-Touch Dialing to properly work, it must be enabled.

ONE-TOUCH DIALING

2-9:Press and hold the corresponding memory number for more than 1 second.

TWO-TOUCH DIALING

10-99:Press the first digit and second digits of the memory number short and long respectively.

	• If no phone number is stored in the location entered, "Location is
Note
	empty" will appear on the screen.
	• If One Touch Dial is set to Off:
	Enter the speed dial location number then press the Send Key	.
	• Location 1 is reserved for voicemail.
	Location 2-99 are unassigned.
	To assign a speed dial location, please see page 43.

CONTACTS

Stores up to 500 entries, each of which can be assigned to a group. Entries can be retrieved by name or group.

ADD NEW

Adds a new entry.

1.Press Left Soft Key [Menu], then press “Contacts”,

then "Add new".

2.Fill in the fields as they are selected. Press the Navigation Key up

or down / to select a field.

PHONE BOOK FIELDS: Name/Mobile/Email/URL/Group/Ringtone/Vibration/ Msg Alert/Photo/Secret/Memo

3.To save the entry, press Left Soft Key [Save]. To return to the

previous page, press .

	See page 32 for more detailed information about storing a number.
Note

38 39