Panasonic DP-MB350 manual More copying features, Collate copy, Duplex feature

5. Copier

5.2 More copying features

LMake sure that the {Copy} light is ON.

5.2.1 Collate copy

The unit can collate multiple copies in the same order as the original document pages.

1Set the original (page 19).

2Press {V} or {^} repeatedly to select “Copies”.

3Enter the number of copies (up to 99). i{Set}

4{Advance}

5Press {V} or {^} repeatedly to select “Collate”.

6Press {<} or {>} repeatedly to select “On”. i

{Set} i{Advance}

7When using the scanner glass:

1. {Start}

LThe unit will scan 1 page.

2.Place the next document on the scanner glass and press {Set}. Repeat this until you have scanned all pages, and then press {Start}.

LThe unit will start copying.

When using the automatic document feeder:

{Start}

8After you finish copying, press {Stop} to reset this feature.

Example: Making 2 copies of a 4-page original

“5.2.1 Collate copy”, page 38). The unit will make 1 set of a collated copy and stop temporarily so you can check whether the copy was made as you expected. If the copy is correct, press {Start} to continue copying.

If the copy is not correct, press {Stop} and start again from the beginning.

5.2.2 Duplex feature

The following types of copies are available:

–1-sided originals to 2-sided copies

–2-sided originals to 1-sided copies using the automatic document feeder

–2-sided originals to 2-sided copies using the automatic document feeder

You then need to select the binding for originals and/or copies.

–Long edge

–Short edge

document

4

3

2

1

4

3

2

1

Collated pages

Note:

4

4

3

3

2

2

1

1

Uncollated pages

LA4, letter or legal size recording paper (plain and thin) can be used.

LDuplex copy is not available for the quick ID copy feature (page 39), easy repeat feature (page 39) or poster feature (page 40).

To make 1-sided originals into 2-sided copies

LThe unit will store the documents into memory while collating the copies. If the memory becomes full while storing, the unit will only print out the stored

pages.

LYou can hold the previous collate setting (feature #469 on page 67).

Proof set feature

To make 1 set of a collated copy first, press {<} or {>} repeatedly to display “Proof Set” (step 6 on

1.Set the original (page 19).

2.Press {Duplex}, and press {V} or {^} repeatedly to select “1-Side/2-Side”. i{Set}

3.Press {V} or {^} repeatedly to select the desired binding setting for copies.

–“→ Long Edge”

–“→ Short Edge”

4.{Set}

5.If necessary, enter the number of copies (page 36).

38