Axis Communications 212 PTZ user manual Key features Overview, Status indicator LED, Audio

AXIS 212 PTZ - Product Features

Key features

Overview

Camera unit

Status indicator (LED)

Audio out Audio in

Dome casing

Cover plate

Control

Microphone Power button connector

Power Network Network indicator indicator connector

(LED) (LED)

Serial number (S/N)

The serial number is required during the installation.

Please make a note of the serial number and retain for future reference.

I/O terminal connector

Power Connector - For connection of the PS-H power adapter (included).

I/O Connector - The I/O terminal connector provides the physical interface to one transistor output, one digital input and an auxiliary connection point for DC power. For more information, see The I/O Terminal Connector, on page 33.

Network Connector - The camera connects to the network via a standard network connector. Supporting NWAY, the camera detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). Supporting PoE (Power over Ethernet), the camera can be powered directly from the network cabling.

Audio out- Audio output (line level), which can be connected to a public address (PA) system or an active speaker with a built-in amplifier. A pair of headphones can also be attached. A stereo connector must be used for the audio out.

Audio in - One 3.5mm input for a mono microphone, or for line-in mono signal (left channel is used from a stereo signal).

Microphone - Built-in microphone.

To prevent unauthorized listening, the internal microphone can be disabled by inserting a plug in the 'Audio in' connector.

Serial Number Label - The serial number may be required during installation.

Control Button - Press this button to install the camera using the AXIS Internet Dynamic DNS Service, or to restore the factory default settings, as described in Resetting to the Factory Default Settings, on page 32.

6